Kiến thức

UCD-S101G-0016-D10D-PRQ

IXARC Absolute Rotary Encoder

UCD-S101G-0016-D10D-PRQ

POSITAL Measuring Tools & Sensors SSI / SSI + Incremental – Gray, Singleturn, 16 bit (65536 Steps; 0.005°), IP68 / IP69K, Aluminum / Steel, Solid Shaft – Synchro, ø 36 mm (1.42″), ø 10 mm (0.39″), Connector – Radial M12, ≤ 0.09° (Magnetic), CE / UL Available 0

picture-dx-3-crp-m2-nnn.jpg
Interface
Interface SSI with Preset
Manual Functions Preset + complement via cable or connector
Interface Cycle Time ≥ 25 µs
Number of Preset Cycles 5,100,000
SSI Format SSSSSSSSSSSSSSSS00
Video Manual video-link

Watch a simple installation video

ucx_s1_zeroset.jpg
ucx_s1_direction.jpg
Outputs
Output Driver RS422
Electrical Data
Supply Voltage 4.5 – 30 VDC
Current Consumption Typical 50 mA
Power Consumption ≤ 1.0 W
Start-Up Time
Clock Input RS 422, via Optocoupler
Clock Frequency 100 kHz – 2 MHz
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 500 years @ 40 °C
Sensor
Technology Magnetic
Resolution Singleturn 16 bit
Accuracy (INL) ±0.0878° (≤ 12 bit)
Sense Signal (Default) Clockwise shaft movement (front view on shaft)
Code Gray
Environmental Specifications
Protection Class (Shaft) IP68/IP69K
Protection Class (Housing) IP68/IP69K
Operating Temperature -40 °C (-40 °F) – +85 °C (+185 °F)
Humidity 98% RH, no condensation
Mechanical Data
Housing Material Steel
Housing Coating Cathodic corrosion protection (>720 hrs salt spray resistance)
Flange Type Synchro, ø 36 mm Heavy Duty
Flange Material Aluminum
Shaft Type Solid, Length = 20 mm
Shaft Diameter ø 10 mm (0.39″)
Shaft Material Stainless Steel V4A (1.4112, 440 B), hardened
Max. Shaft Load Axial 180 N, Radial 180 N
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
10 (180 N / 180 N), 15 (150 N,150 N), 30 (100 N / 100 N)
Friction Torque ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 6000 1/min
Shock Resistance ≤ 200 g (half sine 11 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 30 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 56 mm (2.20″)
Weight 195 g (0.43 lb)
Electrical Connection
Connection Orientation Radial
Connector M12, Male, 8 pin, a coded
Product Life Cycle
Product Life Cycle Established
Approval CE + cULus
Connection Plan
SIGNAL PIN NUMBER
Power Supply 2
GND 1
Data+ 5
Data- 6
Clock+ 3
Clock- 4
Preset 7
DIR 8
Shielding Connector Housing
Connector-View on Encoder
Rotation Clockwise (seen on shaft)
Dimensional Drawing
drawing-ucd-d10d-q3a-n.png
drawing-mc-3-cr-360-sps-nnn12b-n-prq-n.png

2D Drawing

The picture and drawing are for general presentation purposes only. Please refer to the “Download” section for detailed technical drawings. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.

© FRABA B.V., All rights reserved.

Chuyên mục: Kiến thức

Related Articles

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Back to top button